| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| I. TECHNICAL PART | |||
| ITEMS | TECHNICAL PARAMETERS | ||
| 1 | RUBBER KNEADER XSN-35X20 |
Total volume of mixing chamber | 75L |
| Working volume of mixing chamber | 35L | ||
| Driving motor power | 55KW | ||
| Tilting motor power | 2.2KW | ||
| Tilting angle | 140° | ||
| Rotational speed of the rotor (front/rear) | 30/24.5 r/min | ||
| Pressure of compressed air | 0.5-0.8MPa | ||
| Capacity of compressed air | ≥0.9m³/min | ||
| Pressure of cooling water | 0.3-0.4MPa | ||
| Pressure of heating steam (plastic mixing) | 0.5-0.8Mpa | ||
| Overall dimension | 3200X1900X2950mm | ||
| Weight | 6500Kg | ||
| 2 | CUTTER XQL-80 |
Type | XQL-80 |
| Width of knife mm | 660 | ||
| Knife stroke mm | 680 | ||
| Cylinder total pressure Kn | 80 | ||
| Stroke time s | 14-16 | ||
| Motor power kw | 5.5 | ||
| Overall size LXWXH mm | 2122x1440x2509 | ||
| Weight kgs | 1000 | ||
| 3 | Elevator | Hopper Capacity | About 150 kgs |
| Main Motor | 1.5 kw | ||
| Gearing | Drive chain device | ||
| Electrical control box | Suspension | ||
| Speed | 13.5 m/min | ||
| Load | 150 kgs | ||
| Overall size | 3300*1300*2100mm | ||
| Weight | About 15000 kgs | ||
| 4 | OPEN MIXER XK-400 |
Roll Diameter | 400mm (16'') |
| Roll working length | 1000 mm | ||
| Front Roll Liner speed | 18.65m/min | ||
| Speed Ratio of rolls | 1:1.27 | ||
| Max roll space | 0.1-10mm | ||
| Compound feeding capacity | 18-35kgs | ||
| Motor Power | 37kw | ||
| Overall Size | 4400X1850X1760mm | ||
| Weight kg | 8000kgs | ||
| No. | ITEMS | TECHNICAL PARAMETERS | |
| 5 | Preformer JYZ-250 |
Barrel Diameter mm | 250 |
| Motor Power kw | 19 | ||
| Max Extrud Pressure MPa | 20 | ||
| Highest Temperature °C | 95 | ||
| Max Output Diameter Mm | 190 | ||
| Weight Embryo Range G | 0.03~1500 | ||
| (99%)Precision Rate | ≤±1.0% | ||
| Barrel Volume L | 65 | ||
| Capacity kg/h | 600 | ||
| Cutter Ratio r/min | 23~300 | ||
| Overal Size (L×W×H)mm | 5080×1250×1640 | ||
| Weight t | 3.5 | ||
| (0.01)Electronic Scales g | 300 | ||
| Head Open | Hydraulic | ||
| Feeding Manner | Front | ||
| Electronic Scales Frame m | 0.44×0.44×0.096 | ||
| Working Length mm | 1350 | ||
| 6 | Cooling LSZ1050 |
Diameter mm | 1050 |
| Width mm | 240 | ||
| Height mm | 1600 | ||
| Conveyor Distance mm | 35000 | ||
| Spiral pitch distance mm | 110 | ||
| Input width mm | 650 | ||
| Input height mm | 300 | ||
| Output width mm | 245 | ||
| Output height from ground mm | 1650 | ||
| Conveyor speed (adjustable)m/min | 6~18 | ||
| Motor power kw | 0.75*2 | ||
| Cooling Fan power kw | 3.7 | ||
| Overall Size(L×W×H) mm | 2.15*1.35*2.56 | ||
| Weight T | 1.2 | ||
| No. | ITEMS | TECHNICAL PARAMETERS | |
| 7 | VULCANIZER 1000x900x1/1.6MN |
Total pressure | 160T |
| Platen size | 1000*900 | ||
| Working clearance | 450mm | ||
| Unit working pressure | 17.78kgf/cm2 | ||
| Working layers | 1 | ||
| Piston cylinder diameter&No. | 1-Φ320mm | ||
| Piston stroke | 300mm | ||
| Working pressure | 18.7MPa | ||
| Highest temperautre | 220ºC | ||
| Heat insulation board | 20mm | ||
| Fast open and close speed | 30mm/s | ||
| Slow oepn and close speed | 1-3mm/s | ||
| Heating manner | Electric | ||
| Press manner | The plunger moves from the bottom up to close the mold | ||
| Turning guide rail | Yes | ||
| Control manner | PLC automatic control and process data storage and extraction functions. |
||
| Structure | Column structure track guide open | ||
| Total weight | 5500kgs | ||
){kind=link}