This machine is mainly used in following cases for rubber porduction factory, natural rubber refining, raw rubber and compound ingredient mixing.
1. The mixing mill are equipped with stock blender which save labor and increase production efficiency...
2. Adopting Korea technology, it has reached domestic advanced level. Besides, with hydraulic-controlling roll guide, it can freely adjust the axial separation of roll guide.
3. With chain drive, the main engine owns the characteristics of compact structure, high intensity, low noise and so on.
Factory direct sales, with high quality and competitive price
Rubber mill, Rubber mixing mill, Two roll mill, Open rubber mixing mill, rubber mixer.
This machine is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
3- Main features:
A. The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
B. The machine is equipped with an overload protection device to prevent the main components from being damaged.
C. The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
D. The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
E. The base frame is a whole framework, which is convenient for installation.
F. Stock bender for direct rubber sheet and knife to cut as your need to assemble.
G. Auto-lubrication sysytem for greese or oil and match bearing bush.
A. Two roll mxing mill: Connon Gear Type (Nylon shoe, Copper shoe and Bearing).
B. Two roll mixing mill: Reducer use Hard Tooth Face Type.
C. Two roll mixing mill: B type. (The motor under the roller)
D. Two rolll mixing mill: H type.
|Working diameter of rolls(mm)||160||230||250||300||3360||400||450||560/510||550||660|
|Working length of rolls(mm)||320||600||620||750||900||1000||1200||1530||1500||2130|
|Front roll surface speedm(/min)||8.95||10.21||14.1||15.1||16.25||18.65||24.26||27.72||27.94||28.6|
|Friction ratio||01: 01.4||01: 01.2||01: 01.2||01: 01.3||01: 01.3||01: 01.3||01: 01.3||01: 01.2||01: 01.2||01: 01.2|
|Capacity per. batch(kg)||1~2||6~10||8~15||15~20||20~25||18~35||25~50||35~50||50~60||165|
|Overall dimension: Length*Width*Height(mm)||1380*860*1320||2800*1200*1120||3400*1500*1500||3450*1500*1550||3780*1850*1750||4350*1850*1785||5200*2380*1840||5845*2284*1978||5870*2475*2045||7465*3662*2080|